Trolling Motor Battery Quick Connectors

• RELIABLE PERFORMANCE: Pro Controll Quick Disconnect system is made of super durable, 8-Gauge waterproof tin-plated marine wire to last long.
• EASY REMOVAL: Leave the Quick Connect on the battery and simply unplug to remove your motor from the boat.
• SUPERIOR QUALITY: Expertly engineered and quality tested; Built with the needs of the Angler in mind.
• TOOL-FREE SET UP: Equipped with all the components needed for easy installation. Ideal for situations where a plug and socket cannot be used.

Frequently Asked Questions (FAQ)

Find quick answers about the Quick Connectors before you buy

Snap your trolling motor power on/off without opening the battery box. These marine-ready quick connectors use tinned copper conductors and sealed terminations to deliver a clean, reliable plug-and-play experience at the bow or anywhere you mount your motor.

1. 🔌 What are Pro Controll Quick Connectors, in plain English?

A heavy-duty, tool-free way to connect and disconnect power to your trolling motor. Plug in at the bow (or mounting spot) and get fishing—no need to access the battery each time.

2. 📦 What’s included in the package?

Two quick-connect leads: a motor-side pigtail (butt-splice end) and a battery-side pigtail (ring-terminal end). Both are 8‑AWG tinned marine wire with sealed terminations for marine use.

3. 🔋 What voltages are supported (12V/24V)?

Designed for 12V and 24V trolling-motor systems commonly found on jon, utility, bass boats, pontoons, and kayaks.

4. 📏 How long are the connector leads?

Each connector assembly is approximately 21 inches long, so you can mount the plug where it’s easy to reach without excessive slack.

5. 🧰 Why 8‑gauge wire—will it handle my motor?

8‑AWG tinned copper balances ampacity and flexibility for short pigtail connections with typical trolling-motor currents. Size your main battery‑to‑bow run per your motor maker’s wire‑gauge table to minimize voltage drop.

6. 🛡️ Do I still need a circuit breaker? What size?

Yes. Protect the circuit with a trolling‑motor breaker (often 60A) mounted close to the battery on the positive lead. Always follow your motor manufacturer’s specified breaker/fuse rating.

7. 🧭 Where do I install the connectors?

Mount the plug in a dry, accessible spot near the motor. Route the motor‑side pigtail to your trolling‑motor leads; route the battery‑side pigtail to the battery (via breaker). Support the cable and confirm polarity (+/‑) before power‑up.

8. 🌊 Are they waterproof and corrosion‑resistant?

Yes. Built for marine use with tinned copper and sealed splices. Rinse after salt exposure and inspect/retighten periodically, like any marine electrical connection.

9. 🤝 Will these work with EZ Mount / EZ Mount II and the Battery Harness?

Absolutely. Use the Battery Harness to bring power forward, then terminate in a Quick Connector. Your transom‑mount motor (relocated to the bow via EZ Mount or EZ Mount II) can plug in/out in seconds.

10. 🧾 What are the model and UPC?

Model: RMI8GAQC. UPC: 738281000227—valid for reorders or searching retailers.

11. ↩️ What’s the warranty and return policy?

Typical policy is a one‑year limited warranty and 30‑day returns. Check the current product page for up‑to‑date terms.

12. 💵 How much do they cost, and where can I buy them?

Available at rmioutdoorskc.com and major retailers; pricing can vary by retailer and promotions.